BlueprintCalcs 2D Parametric Trade Tools

Topsoil Calculator

2D Parametric Soil Profile Blueprint & Bulk Delivery Estimator

To calculate topsoil, multiply length (ft) by width (ft) by depth (in), divide by 324 for net cubic yards, and add 10% to 15% for settling. One cubic yard equals 27 cubic feet (around 2,200 lbs for screened loam) and covers 81 sq ft at 4 inches deep.

TOPSOIL EXCAVATION & GRADE CAD
Screened Loam • 12% Settling
DETAIL A: TOPSOIL & ROOT ZONE ESTIMATE ONLY Turf Sod (0.75") Screened Loam 4" Specified Depth Native Subsoil Scarified Base Settling Allowance: +1.48 yd³ (+12%) *ASTM D5268 covers soil specs (pH, OM%, salts). Confirm screen size & weight with yard. HAULAGE & BAG TAKEOFF ESTIMATE 1 Tri-Axle | 3 Single-Axle 13.83 yd³ (15.21 Tons) 374 (1 ft³) | 498 (0.75 ft³) Bags FINISHED GRADE NATIVE SUBSOIL (SCARIFY 2") Edging 13.83 yd³ (4") Width: 25' 0" Depth: 4" Area: 1000 sq ft | Length: 40' 0"
Total Soil: 13.83 Cu Yds (15.21 Tons) | Settling: +1.48 yd³ (@ 12%) Blend: Screened Loam (2200 lbs/yd³)

Soil Bed Inputs Imperial Standard

Quick Project Presets
Footprint Shape
Topsoil Blend & Application
Total Topsoil Required (with Settling)
13.83 yd³ 15.21 Tons
Net Volume: 12.35 yd³ Settling: +1.48 yd³
1.0 cu ft Bags 374 Bags or 498 (0.75 cu ft) Bags
Dump Trucks 1 Tri-Axle or 3 Single-Axle

Topsoil Settling Allowance & Blend Density Reference

Screened soil leaves the loader fluffy because trommels trap air. Once raked, rolled, and watered in, loose dirt drops 10% to 15% within 30–60 days. Ordering solely by net geometry leaves turf below walks and creates puddles. Adding a topsoil settling allowance in this topsoil coverage calculator keeps grades level after rain.

Soil Blend Typical Mix Dry–Moist Weight Settling Best Use
Screened Loam Topsoil Sand, silt & clay 2,200 lb/yd³ (1.10 T) 12% Lawns, sod, grading (4"–6")
Garden Soil 60/40 Blend 60% loam, 40% compost 1,900 lb/yd³ (0.95 T) 15% Raised beds (10"–18")
Sandy Loam Topsoil 65% sand, 25% silt 2,400 lb/yd³ (1.20 T) 10% Clay fix & drainage beds
Lawn Topdressing Mix 70% sand, 30% compost 2,100 lb/yd³ (1.05 T) 8% Aeration leveling (0.25"–0.5")

Topsoil Yardage Calculator Formula & Raised Bed Math

CUBIC YARDS OF TOPSOIL FORMULA:
Net Yards = [ Length (ft) × Width (ft) × Depth (in) ] ÷ 324  |  Circle Area = π × (Diameter ÷ 2)²

In this raised garden bed soil calculator, measure inside framing. Standard 2x lumber is 1.5" thick, so an exterior 4×8 bed measures 3' 9" × 7' 9" inside (29.06 sq ft). At 10" deep, one bed takes 24.2 cu ft (0.90 yd³) net.

Step 1: Measure Area or Raised Beds

Measure rectangular lawns (length × width), circular beds by diameter, or interior walls and count for raised planters.

Step 2: Choose Target Soil Depth

Use 4–6 inches for new sod or seed, 10–18 inches for raised beds, 8–12 inches for shrubs, or 0.25–0.5 inches for topdressing.

Step 3: Add Settling Allowance

Multiply area (sq ft) by depth (in) and divide by 324 for net cubic yards, then add 8%–15% topsoil settling allowance.

Step 4: Size Trucks or Bags

Multiply yards by blend density (1,900–2,400 lb/yd³) for tons, or convert to 27 (1 cu ft) or 36 (0.75 cu ft) bags per yard.

Bulk Topsoil vs. Bags & Dump Truck Limits

Comparing bulk topsoil vs bags turns on bag size and delivery fees. One yard equals 27 1 cu ft bags or 36 0.75 cu ft bags; dense mineral 40-lb bags hold 0.50 cu ft (54 bags/yd³). With $75–$150 drop fees, bagged soil often wins up to 2 yd³, while bulk wins at 3–4+ yd³.

A tri-axle dump truck runs under 60,000–70,000+ lb GVW bridge rules and hauls about 18–20 tons net payload (12–15 yd³). For tight drives, book a single-axle dump truck (4–6 yd³) and lay 3/4" plywood over thin concrete.

Recommended Soil Depth for Lawns, Raised Beds & Topdressing

Soil Depth for New Lawn: 4"–6"

Till the first 2" into scarified subsoil so water drains across the seam instead of puddling.

Raised Bed Soil Depth: 10"–18"

Root crops need 12"+ of loose garden soil 60/40 blend, leaving 1.5" below the rim for mulch.

Shrub & Perennial Beds: 8"–12"

Gives ornamentals loose rooting volume above compacted lot fill; cap with 2"–3" bark mulch.

Lawn Topdressing Calculator: 0.25"–0.50"

Broadcast after core aeration and drag into holes without burying grass crowns.

Landscape Ordering, Drainage & Excavation Notice

  • Call 811 Before Digging: Request utility locates 48–72 hours before tilling or sod-cutting to mark shallow gas, fiber, electric, and water lines; hand-pot near private irrigation and lighting wires.
  • IRC R401.3 Positive Drainage Slope: Slope finished soil at least 6" over the first 10' (5%) away from foundations, and keep grade 4"–6" below siding and weep holes.
  • Bulk Moisture Weight & Scale Tickets: Wet weather shifts soil from ~2,000 lb/yd³ dry to 2,400–2,700+ lb/yd³; confirm volumetric yard vs. scale-ticket ton billing.
  • Supplier Soil Test (ASTM D5268): Request ASTM D5268 specs (pH, OM%, salts), screen size, and herbicide-free compost verification before delivery.

Frequently Asked Questions About Topsoil Yardage

How much topsoil do I need for a new lawn? +
Most turf installations call for 4 to 6 inches of screened loam topsoil tilled into the top 2 inches of native subsoil. One cubic yard covers 81 sq ft at 4 inches deep or 54 sq ft at 6 inches deep before adding 10% to 12% for settling.
How many bags of topsoil in a yard? +
One cubic yard equals 27 cubic feet. You need 27 of the 1 cu ft bags or 36 of the 0.75 cu ft bags to equal one loose cubic yard. Dense mineral 40-lb bags packaged at 0.50 cu ft take 54 bags per cubic yard.
What is the topsoil weight per cubic yard? +
Dry screened loam topsoil averages 2,000 to 2,200 lbs (1.0 to 1.1 tons) per cubic yard. Garden 60/40 compost blends run near 1,900 lbs/yd³, sandy loam averages 2,400 lbs/yd³, and rain-soaked soil can exceed 2,600 lbs/yd³.
How much topsoil fits in a dump truck? +
A commercial tri-axle dump truck legally carries 12 to 15 cubic yards (capped near 18 to 20 tons net payload under 60,000 to 70,000+ lb GVW bridge rules). A single-axle dump truck typically delivers 4 to 6 cubic yards on tighter residential drives.
Materials & Masonry Calculators

Related Layout Tools

View Full Hardscape & Masonry Hub 10 Tools →