BlueprintCalcs 2D Parametric Trade Tools

Gravel Calculator

Interactive 2D Parametric Aggregate Bed Blueprint & Truckload Haulage Sizer

Contractor Gravel Formula: To calculate gravel tonnage, multiply length (ft) by width (ft) by depth (in), divide by 324 for cubic yards, and multiply by 1.35 tons/yd³ for #57 stone (or 1.45 for crusher run). Add 8% to 15% compaction allowance for roller settling.
GRAVEL VOLUME & DRIVEWAY BED CAD
#57 Stone • +8% Allowance
Click canvas to expand DETAIL A: CROWN & BASE BASE DETAIL 1/2"/ft Crown Slope #57 Crushed Stone 3" Specified Depth Geotextile Liner 4-oz Non-Woven Compacted Subgrade 95% Standard Proctor *Grade / Settlement Allowance: +0.37 yd³ (+8%) NATURAL GRADE Soil Shoulder 5 yd³ (6.75 Tons) Width: 10' 0" Depth: 3" Coverage: 500 sq ft | Length: 50' 0"
Total Order: 6.75 Tons (5 Cu Yds) | Allowance: +0.37 yd³ (@ 8%) Material: #57 Crushed Stone (2700 lbs/yd³)

Aggregate Parameters Civil Reference

Gravel & Stone Classification
Quick Project Presets
Gravel Order Required (with Allowance)
6.75 Tons 5 yd³
Net Volume: 4.63 yd³ Allowance: +0.37 yd³
50-lb Retail Bags 270 Bags Coverage: 74.1 sq ft/ton
Dump Trucks (Tri-Axle) 1 Trucks or 1 Tandem Loads

01.Converting Cubic Yards to Quarry Tonnage

Site grading plans measure excavation in volumetric cubic yards, while quarries bill by weight on a certified scale ticket in short tons (2,000 lbs). Bulk density shifts with rock geology, moisture, and fines content, so you convert yards to tons per cubic yard using the stone's compacted weight.

Clean #57 crushed stone (ASTM C33 / AASHTO M43) leaves roughly 40% open void space and averages 2,700 lbs/yd³ (1.35 tons/yd³), using a 5%–8% grade and settling allowance. Crusher run (DGA) mixes angular stone with rock dust, packing fines between stones to reach 2,900 lbs/yd³ (1.45 tons/yd³) with a 15% compaction allowance under a plate compactor.

Aggregate Type Nominal Size Bulk Density Tons / Yard Allowance & Typical Use
#57 Crushed Stone 1/2" to 1" Angular 2,700 lbs 1.35 Tons 5%–8% grade/waste (French drains, top coat)
Crusher Run / DGA 3/4" Down to Fines 2,900 lbs 1.45 Tons 15% compaction (Driveway base, shed pads)
3/8" Pea Gravel 3/8" Smooth River 2,600 lbs 1.30 Tons 5% grade/waste (Walkways, borders, dog runs)
1"–3" River Rock 1" to 3" Rounded 2,800 lbs 1.40 Tons 6% grade/waste (Swales, creek beds, borders)

02.How to Calculate Driveway Gravel & Base Tonnage

Step 1: Measure Area in Feet

Measure driveway, path, or pad length and width in feet with a tape or measuring wheel to find total square footage.

Step 2: Pick Bed Depth

Choose 2 inches for pea gravel walkways, 3 inches for #57 driveway gravel top-dressing, or 4 to 6 inches for crusher run base.

Step 3: Add Compaction Allowance

Multiply length × width × depth (in) and divide by 324 for net cubic yards, then add 5%–8% grade waste for #57 or 15% compaction for crusher run.

Step 4: Convert Yards to Quarry Tons

Multiply adjusted cubic yards by tons per cubic yard (1.35 for #57 stone or 1.45 for crusher run) to size dump truck loads.

03.Three-Layer Subgrade, Crown Slope & Drainage Control

Spreading stone over uncompacted clay lets tire loads pump mud upward into the rock. Durable driveway gravel relies on separation, compacted base lifts, and a positive drainage slope:

1. Geotextile Fabric

Lay non-woven 4-oz to 6-oz geotextile fabric (or woven stabilization fabric on soft clay) over graded, rolled subgrade so subsoil cannot migrate into clean stone.

2. Compacted Base (4"–6")

Place crusher run in 4-inch max lifts, mist lightly, and pack with a plate compactor or vibratory roller to build a firm structural base.

3. Crown & Slope (2%–4%)

Hold at least a 2% drainage slope (1/4"/ft) away from foundations, or a 4% (1/2"/ft) center crown slope into roadside swales so water sheds instead of rutting.

04.Dump Truck Classes & Legal Highway Payloads

  • Single-Axle Dump Truck (5–7 Tons / 4–5 yd³): Fits narrow residential driveways, tight alleys, and short top-dress orders.
  • Tandem Dump Truck (10–14 Tons / 7–10 yd³, 12T Ref): Standard residential hauler; maneuvers suburban drives cleanly with moderate axle weight.
  • Tri-Axle Dump Truck (16–20 Tons / 12–15 yd³, 18.5T Ref): Lowest freight cost per ton for full driveways and shed pads.
  • Tailgate Spreading: Drivers can chain the tailgate for a 2"–3" windrow on straight, flat drives with clear overhead clearance.

Field, Safety & Quarry Ordering Notice

  • Call 811 Before Digging: Request underground utility locates 48–72 hours before excavating any driveway box or drainage trench.
  • Scale Ticket & Density Variance: Quarries bill by certified scale ticket weight; moisture and granite vs. limestone geology shift bulk density between 2,400 and 3,000+ lbs/yd³.
  • DOT Limits, Frost Bans & Overhead Lines: Truck capacity equals state DOT axle/GVW limits minus tare weight (check seasonal spring weight bans), and verify overhead power line clearance before raising a dump bed.
  • Drainage & ADA Constraints: Keep at least a 2% (1/4"/ft) slope away from buildings; loose gravel and pea gravel are not ADA-compliant accessible surfaces.
  • Permits & Inspection: Confirm driveway apron, culvert, curb-cut, and stormwater rules with your municipal building inspector or DOT office.

05.Frequently Asked Gravel Questions

How much gravel do I need for a 100 foot driveway? +
A 100-foot by 10-foot driveway topped with 3 inches of #57 crushed stone needs 9.26 net cubic yards. Adding an 8% grade and settling allowance brings the order to 10.0 cubic yards, or 13.5 tons (one tandem dump truck or partial tri-axle load).
How many tons of gravel are in a cubic yard? +
One cubic yard of #57 crushed stone weighs roughly 1.35 tons (2,700 lbs/yd³). Crusher run (DGA) averages 1.45 to 1.50 tons (2,900–3,000 lbs/yd³), 3/8-inch pea gravel runs 1.30 tons (2,600 lbs/yd³), and river rock runs 1.40 tons (2,800 lbs/yd³), depending on quarry geology and moisture.
How many cubic yards of gravel fit in a dump truck? +
A tri-axle dump truck legally hauls roughly 16 to 20 tons (12 to 15 cubic yards; 18.5T reference), capped by state DOT axle limits minus truck tare weight. A tandem dump truck carries roughly 10 to 14 tons (7 to 10 yd³; 12T reference), and a single-axle carries 5 to 7 tons.
How many 50 lb bags of gravel make a cubic yard? +
It takes 54 to 60 50-lb bags to make one cubic yard. Each 50-lb bag holds 0.50 cubic feet by volume (27 ÷ 0.50 = 54 bags), while stone weight averages 2,700 to 2,900 lbs per cubic yard (54 to 58 bags by weight).
Materials & Masonry Calculators

Related Layout Tools

View Full Hardscape & Masonry Hub 10 Tools →