BlueprintCalcs 2D Parametric Trade Tools

Amp Hours to Watt Hours Calculator

To convert Amp-Hours to Watt-Hours, multiply battery Amp-Hours by nominal voltage: Wh = Ah × V. For example, a 100Ah 12V battery yields 1,200 Watt-Hours (1.2 kWh). Divide total Watt-Hours by 1,000 to convert into Kilowatt-Hours for solar energy storage.

AH TO WH ENERGY CAD SCHEMATIC
1200 Wh Nominal • 1.2 kWh
DETAIL A: VOLTAGE IMPACT MATRIX VOLTAGE CAPACITY ENERGY 12V DC 100Ah 1,200 Wh 24V DC 100Ah 2,400 Wh 48V DC 100Ah 4,800 Wh • Same Ah at 48V stores 4× the Watt-Hours as 12V. • Higher voltage reduces conductor wire thickness. CURRENT CHARGE 100 AMP-HOURS (Ah) Nominal Voltage: × 12V DC × EQUALS STORED WORK ENERGY (Wh) 1,200 Wh (1.2 kWh) LiFePO4 Usable (90% DoD): 1,080 Wh Lead-Acid Usable (50% DoD): 600 Wh Continuous 100W Run: 9.7 Hours PHYSICAL FORMULA: Energy (Wh) = Electric Charge (Ah) × Potential (Volts) SI Equivalency: 43,20,000 Joules | Nominal kWh: 1.2 kWh 90% LITHIUM LIFEPO4 USABLE CAPACITY: 1,080 Wh To size inverters or generators, factor an additional 10–15% DC-to-AC conversion loss. CHARGE: 100 Ah | VOLTAGE: 12V DC | ENERGY: 1,200 Wh (1.2 kWh)
✦ Direct Conversion: 100Ah @ 12V = 1,200 Wh (1.2 kWh)
LiFePO4: 1080 Wh Lead-Acid: 600 Wh
Watt-Hours 1200 Nominal Energy
Kilowatt-Hours 1.2 kWh Stored
Net Usable 972 Wh At 90% DoD
150W Runtime 6h 29m Fridge / CPAP

Conversion Inputs & Voltage

Direct Wh = Ah × V
100 Ah
10Ah (Portable) to 500Ah (Bank)
Energy Conversion Summary 1200 Wh
Nominal Watt-Hours:
1200 Wh
Nominal Kilowatt-Hours:
1.2 kWh
Milliamp-Hours:
1,00,000 mAh
Net Usable Energy:
972 Wh (0.972 kWh)
At 24V (Same Ah):
2400 Wh
At 48V (Same Ah):
4800 Wh

Understanding the Difference Between Amp-Hours and Watt-Hours

In the solar and battery storage trades, confusion between Amp-Hours (Ah) and Watt-Hours (Wh) is the single most common cause of under-budgeted power systems. Understanding the physics behind these units prevents costly mistakes:

1

Amp-Hours Measure Coulombs of Charge, Not Energy

An Amp-Hour measures the flow of electrical charge over time (1 Ah = 3,600 Coulombs). However, charge alone cannot perform work without electrical potential (pressure), which is Voltage. To calculate the actual kinetic work or energy capable of running a light bulb, heater, or motor, charge must be multiplied by voltage (Wh = Ah × V).

2

Comparing Batteries Across Different Voltages

If an installer offers you a 100Ah 12V battery for $300 and a 100Ah 48V battery for $1,000, the 48V battery is actually significantly cheaper per unit of stored energy! The 12V battery provides 1,200 Wh (\$0.25/Wh), whereas the 48V battery stores 4,800 Wh (\$0.208/Wh). Always normalize battery capacity into Watt-Hours before making purchasing decisions.

Universal 100Ah Battery Energy Across Nominal DC Voltages

Battery Voltage Capacity (Ah) Stored Energy (Wh) Stored Energy (kWh) Common Application
3.2V DC (Single Cell) 100 Ah 320 Wh 0.32 kWh Raw LiFePO4 Prismatic Cell
12.8V DC (4S Pack) 100 Ah 1,280 Wh 1.28 kWh RV, Camper Van, Trolling Motor
25.6V DC (8S Pack) 100 Ah 2,560 Wh 2.56 kWh Off-Grid Cabin, Medium Solar
51.2V DC (16S Pack) 100 Ah 5,120 Wh 5.12 kWh Server Rack Battery, Whole-Home ESS

Engineering Principles: Converting Amp-Hours to Watt-Hours in Battery Systems

Voltage Sag & Operating Nominal Curves

In real-world battery operations, terminal voltage is not static. A standard 12V lead-acid battery rests at 12.6V fully charged, drops to 12.0V under steady load, and reaches cut-off near 10.5V. When calculating Watt-Hours using nominal voltage (12.0V), you establish an accurate baseline for energy storage capacity. However, high discharge rates (such as high C-rates exceeding 0.5C) cause increased internal resistive heating and significant voltage sag, diminishing actual delivered Watt-Hours according to Peukert's law.

LiFePO4 Flat Voltage Advantage

Lithium Iron Phosphate (LiFePO4) chemistry exhibits an extraordinarily flat discharge plateau. A 4S lithium pack delivers nearly 85% of its total energy between 13.2V and 12.8V before rapidly declining. Because the operating voltage remains elevated across the entire discharge cycle, LiFePO4 batteries deliver practically 100% of their calculated Watt-Hour rating under high loads, unlike flooded or sealed AGM lead-acid counterparts which suffer severe capacity reduction under continuous high amperage draws.

Frequently Asked Questions About Ah to Wh Conversion

How do you convert Amp-Hours to Watt-Hours? ↓

To convert Amp-Hours to Watt-Hours, multiply the Amp-Hour rating by the battery's nominal DC voltage: Watt-Hours = Amp-Hours × Volts. For example, a 100Ah 12-Volt battery provides 100 × 12 = 1,200 Watt-Hours (or 1.2 Kilowatt-Hours) of total stored energy.

How many Watt-Hours is a 100Ah 12V battery? ↓

A 100Ah 12V battery holds 1,200 Watt-Hours (1.2 kWh) of nominal energy. If it is a Lithium LiFePO4 battery, approximately 90% (1,080 Wh) is usable. If it is an AGM or flooded lead-acid battery, only 50% (600 Wh) is usable to prevent permanent chemical damage.

Why does voltage matter when comparing battery Amp-Hours? ↓

Amp-Hours only measure electrical charge, not total energy. A 100Ah 12V battery provides 1,200 Watt-Hours, whereas a 100Ah 48V battery provides 4,800 Watt-Hours—four times the energy despite having the exact same Amp-Hour number. Watt-Hours is the only valid metric for comparing batteries of differing voltages.

How do I convert milliamp-hours (mAh) to Watt-Hours? ↓

Divide the milliamp-hour (mAh) figure by 1,000 to convert to Amp-Hours, then multiply by nominal voltage: Wh = (mAh / 1,000) × V. For example, a 5,000mAh smartphone battery operating at 3.7V nominal provides (5,000 / 1,000) × 3.7 = 18.5 Watt-Hours.

Solar & Power Calculators

Related Layout Tools

View Full Solar & Battery Power Hub 8 Tools →