BlueprintCalcs 2D Parametric Trade Tools

Weight Distribution Hitch Calculator

To size a weight distribution hitch, calculate total tongue weight (10% to 15% of gross trailer weight plus bed cargo behind the rear axle) and select matching spring bars. Adjust spring bar tension to achieve 50% Front Axle Load Restoration (FALR), restoring steering control and eliminating rear suspension sag.

WEIGHT DISTRIBUTION HITCH CAD
1000 lb Spring Bars (50% FALR)
LEVEL GROUND REFERENCE LINE SPRING BAR TENSION TORQUE +151 lbs Restored +521 lbs Net TW: 840 lbs WB: 145" OH: 52"
* SAE J2807 Guidance: Optimal modern standard: 50% FALR returns steering authority without making the steering axle twitchy.
Towing Rig Parameters Units: Lbs & Inches
7,000 lbs
12.0% (840 lbs)
10% (Minimum Safe) 12% (Optimal RV) 15% (Heavy Tongue)
145"
52"
0 lbs

Crucial: Cargo behind the rear axle exerts downward leverage directly adding to tongue load.

Common Towing Presets:
Hitch Specification Takeoff 1000 lb Bars
Recommended Spring Bars
1000 lbs
Trunnion Bar
Total Tongue Load
840 lbs
(12% of GTW)
Front Weight Restored: +151 lbs (50% FALR)
Unassisted Front Lift (No WDH): -301 lbs
Net Rear Axle Load: +521 lbs

1. Towing Leverage: How Tongue Weight Operates as a Class 1 Lever

When hitching a bumper-pull trailer without weight distribution, the truck acts as a Class 1 lever with the rear axle as the fulcrum. Tongue weight dropping 45 to 60 inches behind the axle exerts downward torque, squatting the rear and pivoting front tires upward.

  • Loss of steering precision and front-wheel traction in crosswinds.
  • Extended stopping distance as front brakes unload.
  • Headlights aimed skyward, reducing night visibility.
  • Rear axle overloading beyond Gross Axle Weight Rating (GAWR).

2. The Mechanics of Weight Distribution

A Weight Distribution Hitch (WDH) uses spring steel bars under tension to exert upward leverage against the hitch head. This transfers effective tongue load across three zones:

Tow Vehicle Front Axle

Receives ~25% to 33% of effective tongue load to restore steering grip.

Tow Vehicle Rear Axle

Carries ~45% to 50% of net load, eliminating excessive squat.

Trailer Tandem Axles

Carries ~20% to 25% transferred back through the A-frame.

3. Front Axle Load Restoration (FALR): The Modern SAE J2807 Standard

Modern truck manufacturers recommend sizing spring bars to 50% Front Axle Load Restoration (FALR) per SAE J2807 to avoid over-tensioning the front suspension:

Target Coupled Height = Coupled Front Fender Height - (0.50 * Front Fender Rise)

4. Spring Bar Rating Selection & Cargo Bed Considerations

Bar Rating Effective Tongue Range Typical Trailer GTW Recommended Bar Style
600 lbs 400 – 600 lbs 3,500 – 5,000 lbs Round Bar (Pop-ups, small utility)
800 lbs 600 – 800 lbs 5,000 – 7,000 lbs Round / Trunnion Bar (Mid-size travel trailer)
1,000 lbs 800 – 1,000 lbs 6,500 – 8,500 lbs Trunnion Bar (26-30ft bunkhouse RV)
1,200 lbs 1,000 – 1,200 lbs 8,500 – 10,500 lbs Trunnion Bar (Toy haulers, slide RVs)
1,400+ lbs 1,200 – 1,500 lbs 10,000 – 14,000 lbs Heavy Duty Trunnion (Class V receiver)

5. Field Setup Procedure: Tape Measure Method on Level Ground

  1. Park on Level Concrete: Align truck and trailer straight on flat ground. Chock trailer tires.
  2. Record Baseline Fender Heights: Measure uncoupled front and rear wheel arch heights.
  3. Level Trailer & Set Ball Height: Adjust shank ball 1.0" to 1.5" above coupler to compensate for squat.
  4. Couple Trailer: Drop tongue onto ball and record coupled front fender rise.
  5. Engage Spring Bars: Extend jack to relieve tension, lock chains/brackets, then retract jack.
  6. Verify 50% Restoration: Front fender should return 50% toward baseline height.

Frequently Asked Questions: Weight Distribution Hitches & FALR

How do you size a weight distribution hitch spring bar? ↓

Size spring bars based on Total Effective Tongue Weight, which equals the loaded trailer tongue weight plus all cargo loaded in the truck bed behind the rear axle. If your trailer tongue weighs 800 lbs and you carry 150 lbs of gear behind the truck axle, your effective tongue load is 950 lbs, requiring 1,000 lb rated spring bars.

What is Front Axle Load Restoration (FALR)? ↓

FALR measures how much of the front axle weight lifted by trailer tongue leverage is returned to the front steering tires by the hitch spring bars. Under modern SAE J2807 standards and manufacturer guidelines (Ford, GM, Ram), 50% FALR is standard, meaning half the fender rise caused by trailer coupling is eliminated.

Can you have too heavy of a weight distribution hitch? ↓

Yes. Installing 1,400 lb spring bars on a light 500 lb tongue creates an excessively rigid connection between truck and trailer. This causes severe jarring, reduces rear tire traction over dips, and can bend or crack trailer A-frame tongues and truck receiver hitches.

What is the difference between round bar and trunnion bar hitches? ↓

Round bars insert into the bottom of the hitch head and curve backward, offering simple installation and lower cost, but reduce ground clearance on speed bumps. Trunnion bars insert into the side of the hitch head horizontally, providing superior ground clearance and handling higher tongue weights (up to 1,600+ lbs).

Why does trailer tongue weight need to be 10% to 15%? ↓

If tongue weight drops below 10% of Gross Trailer Weight, the trailer becomes tail-heavy. This induces dynamic trailer sway (fishtailing) at highway speeds that cannot be corrected by steering, often resulting in rollover accidents. A 12% to 13% tongue weight ensures inherent aerodynamic stability.

Workshop & CAD Calculators

Related Layout Tools

View Full Workshop & Automotive CAD Hub 12 Tools →